oneida victor 1.5 pans on duke 1.5 traps

Posted by: michaelp7318

oneida victor 1.5 pans on duke 1.5 traps - 09/21/14 09:10 PM

I need a few pans for some duke 1.5 traps, I was told by the person i got them from said the OV 1.5 pans fit the duke 1.5s. Can anyone confirm this.
Posted by: NYCOYOTEHOUNDS

Re: oneida victor 1.5 pans on duke 1.5 traps - 09/22/14 07:36 AM

Not sure. Do you have the OV pans? If you are buying them then why not just buy Dukes?
Posted by: Hal

Re: oneida victor 1.5 pans on duke 1.5 traps - 09/22/14 08:38 AM

The OV pan will work just fine on a Duke. -- Hal
Posted by: michaelp7318

Re: oneida victor 1.5 pans on duke 1.5 traps - 09/22/14 11:37 AM

I dont have the ov pans. Iam getting a very large trap supply order together. I will just get them added to the order, instead of having to get money order or waiting on a personal check to clear. Puchased 2 doz 1.5 dukes at an estate sale for 25 bucks, 1doz unopened and other opened, 4 pans were filed down to short to work properly. That is why I need the pans.
THANKS FOR THE ADVISE
Posted by: Hal

Re: oneida victor 1.5 pans on duke 1.5 traps - 09/22/14 01:46 PM

Hang on! All you need to do is refile the notch until it's deep enough and bend the end of the cross frame to compensate and level the pan. -- Hal
Posted by: michaelp7318

Re: oneida victor 1.5 pans on duke 1.5 traps - 09/22/14 08:31 PM

Hal I read your post about refiling the notch deeper earlier today . Got 2 fixed, 2 to go. I did not know I could that. Advise like this why I joined up on this forum. thanks HAL
Posted by: NYCOYOTEHOUNDS

Re: oneida victor 1.5 pans on duke 1.5 traps - 09/23/14 12:50 PM

Ask and we all try to help. Great bunch of fellas.