Please observe our rules: No profanity. No flaming. No commercial messages. No personal messages please.

Trap Line Help
 
Trap Line Home   Trap Line Forum   Trap Line Help   Trap Line Photo   Old Hollow Blog   Archives
Topic Options
#1651 - 09/22/14 02:10 AM oneida victor 1.5 pans on duke 1.5 traps
michaelp7318 Offline
Member

Registered: 04/06/14
Posts: 71
Loc: TN
I need a few pans for some duke 1.5 traps, I was told by the person i got them from said the OV 1.5 pans fit the duke 1.5s. Can anyone confirm this.

Top
#1652 - 09/22/14 12:36 PM Re: oneida victor 1.5 pans on duke 1.5 traps
NYCOYOTEHOUNDS Offline
Member

Registered: 10/24/09
Posts: 74
Loc: NY
Not sure. Do you have the OV pans? If you are buying them then why not just buy Dukes?

Top
#1653 - 09/22/14 01:38 PM Re: oneida victor 1.5 pans on duke 1.5 traps
Hal Online   content
Moderator

Registered: 07/17/00
Posts: 10227
Loc: Blue Creek, Ohio, USA
The OV pan will work just fine on a Duke. -- Hal
_________________________
Endeavor to persevere.

Top
#1654 - 09/22/14 04:37 PM Re: oneida victor 1.5 pans on duke 1.5 traps
michaelp7318 Offline
Member

Registered: 04/06/14
Posts: 71
Loc: TN
I dont have the ov pans. Iam getting a very large trap supply order together. I will just get them added to the order, instead of having to get money order or waiting on a personal check to clear. Puchased 2 doz 1.5 dukes at an estate sale for 25 bucks, 1doz unopened and other opened, 4 pans were filed down to short to work properly. That is why I need the pans.
THANKS FOR THE ADVISE

Top
#1655 - 09/22/14 06:46 PM Re: oneida victor 1.5 pans on duke 1.5 traps
Hal Online   content
Moderator

Registered: 07/17/00
Posts: 10227
Loc: Blue Creek, Ohio, USA
Hang on! All you need to do is refile the notch until it's deep enough and bend the end of the cross frame to compensate and level the pan. -- Hal
_________________________
Endeavor to persevere.

Top
#1656 - 09/23/14 01:31 AM Re: oneida victor 1.5 pans on duke 1.5 traps
michaelp7318 Offline
Member

Registered: 04/06/14
Posts: 71
Loc: TN
Hal I read your post about refiling the notch deeper earlier today . Got 2 fixed, 2 to go. I did not know I could that. Advise like this why I joined up on this forum. thanks HAL

Top
#1657 - 09/23/14 05:50 PM Re: oneida victor 1.5 pans on duke 1.5 traps
NYCOYOTEHOUNDS Offline
Member

Registered: 10/24/09
Posts: 74
Loc: NY
Ask and we all try to help. Great bunch of fellas.

Top

Moderator:  Hal, musher, redsnow, Ric 

 
Sullivan's Line - Trapping Books, Videos, and Other Products for the Trapper.
 
Design and Production by Sullivan Promotions
Copyright 2000-2017  Sullivan's Scents and Supplies - All rights reserved.